Creality unveiled the Falcon T1C on November 18, 2026, a compact laser engraver for wood, leather and metal. Pre-orders are open, and the worldwide market launch follows in mid-December 2026, according to the manufacturer.
According to Creality, the device is aimed at businesses that personalize products, as well as home studios, small workshops and pop-up markets.
What can the two lasers do?
The blue laser delivers 15 watts and processes wood, bamboo, leather and dark acrylic. The infrared laser delivers 5.5 watts and marks metal, plus dark acrylic and suitable plastics.
Two lasers, two tasks
Creality Falcon T1C, unveiled on November 18, 2026
Blue laser with 15 watts
- Wood
- Bamboo
- Leather
- Dark acrylic
Infrared laser with 5.5 watts
- Marking metal
- Dark acrylic
- Suitable plastics
Work area 120 by 120 millimeters, with extension bed 120 by 480 millimeters
Sources: Creality (PR Newswire)
In its press release, Creality cites a galvo setup with scan speeds of up to 6,500 millimeters per second, though only in certain image engraving modes. For the PixelFlow control system, Creality claims up to eight times the efficiency in image processing compared with conventional methods, measured under laboratory conditions. The focal spots are 0.06 by 0.05 millimeters for the blue laser and 0.03 by 0.03 millimeters for the infrared laser.
The work area measures 120 by 120 millimeters, and an optional extension bed turns it into 120 by 480 millimeters. You can focus at the push of a button, by hand or with the help of the camera. In the Falcon Design Space software, you create layers with stored settings for both lasers, so you don't have to swap the laser modules. In addition, there are five AI tools, of which the announcement names four: tracing outlines, removing backgrounds, filling areas and filters.
How much does the Falcon T1C cost?
The press release gives prices only for the US market. There, the device is available on its own and as a bundle with the AP1S air purifier, both with a pre-order discount in exchange for a small deposit. According to the list price, the bundle costs significantly more than the device alone.
The announcement gives no price for Germany. Notebookcheck cites a price in the manufacturer's German shop, which you can check there yourself. Whether a pre-order discount applies there is not clear from either source. Notebookcheck describes the laser power as comparatively low and praises the fine focal spots.
What this means for you
Our assessment: The announcement mentions neither a laser class nor an enclosure or protective devices. Ask the manufacturer or retailer about this before pre-ordering, and factor safety goggles and fume extraction into your budget. According to the list price, the bundle with the air purifier is significantly more expensive than the device alone.
Also check whether your workpieces fit on the 120 by 120 millimeter area. That is enough for pendants, signs and jewelry pieces; for larger panels you need the extension bed or a different device. Whether the deposit is refundable is not stated in the announcement. Read the terms in the shop, or wait until mid-December, when the German price and first tests will be available.
Creality unveiled the Falcon T1C on November 18, 2026.
Sources