The layout is finished, the client gets in touch while on the go, and suddenly a transposed number is spotted. This is exactly where the mobile Acrobat app shines. You can open PDFs directly on the iPad, highlight passages, leave comments, correct text, and even add handwritten notes with the Apple Pencil.
The example is a property brochure for a harbor residence with a cover, property description, and floor plans. Using this document, you will go through all the important tools in this tutorial, from pure feedback to direct text correction.
Key Takeaways
- Highlighting, commenting, and striking through are the fastest tools for recording change requests.
- Notes using the speech bubble give the layout designer concrete instructions that go beyond a simple highlight.
- Underlines in signal colors immediately catch the eye when scrolling through.
- Text passages can be edited directly. You can easily adjust font size, font style, color, and position.
- With the pen, you draw freely on the document, for example to mark images or add arrows.
- Don't forget to save the file at the end.
Step-by-Step Guide
Step 1: Get the PDF onto the iPad and open it
Before you can get started, the document has to be on your tablet. In the example, the brochure was transferred to the iPad via Dropbox and then opened in the Acrobat app. It doesn't matter whether you get the file via iCloud, an email attachment, or another cloud service. What matters is that the PDF is displayed in the app and you can page through it.

Step 2: Highlight passages with the highlighter
The simplest form of feedback is highlighting. In the bottom toolbar, tap the small icon for the comment function and then select the highlighter. Then drag your finger or the pen over the desired passage. In the example, a paragraph about the property's location is highlighted in yellow. However, a highlight alone doesn't tell the layout designer what exactly he should change. That is why the explanation follows in the next step.

Step 3: Formulate change requests with a note
To make your comment understandable, you also leave a note. To do this, tap the speech bubble in the toolbar and place the note at the highlighted spot. There you write what exactly is wrong. A phrasing like "Please replace this paragraph completely with …" is much more helpful than a general hint. The note remains in the document and is directly visible to the layout designer.

Step 4: Have an entire text section replaced
Sometimes a comment isn't enough, and you want to replace a paragraph entirely with new text. Write the desired wording directly into the note, for example with the addition "Replace paragraph as follows:". That way the layout designer doesn't have to guess what you have in mind. In the example, a new text suggestion for the description is entered. You then save the note, and the change is stored in the document.

Step 5: Strike through unnecessary sentences
If a sentence is to be removed without replacement, the strikethrough tool is the right choice. It is indicated in the toolbar by a red crossed-out icon. Select it and draw a line through the sentence in question. The text remains visible but is clearly marked as superfluous. This is exactly how the layout designer immediately recognizes that nothing is to be replaced here, only removed.

Step 6: Underline important passages in signal colors
Underlining is a good option for particularly important text passages. The Acrobat app offers bold colors for this, for example an intense red or a vivid green. Choose the color that suits your correction. These underlines stand out immediately when scrolling through, so the layout designer doesn't overlook important passages. Use the colors deliberately so the document doesn't look overloaded.

Step 7: Insert a text box for your own additions
If you want to add your own content to the document, for example a quote, place a new text box at the desired spot. To do this, select the text function and tap the position in the document. Then enter the text and save your input. The box is treated like an independent element and can be edited further later on.

Step 8: Adjust text boxes in font size, width, and color
An inserted text box is not fixed. You can increase the font size, drag the box wider, and change the color. A simple principle applies here: legibility comes first. Yellow text on a light background is hardly visible in the example, which is why it is switched to red. After each change, check whether the text remains easy to read on the document.

Step 9: Draw and mark freely with the pen
The pen is the most versatile tool in the app, especially with the Apple Pencil. With it you can circle images, draw arrows, or sketch swap requests. In the example, an image is crossed out and swapped with another simply by marking it by hand. Even small drawings, such as a heart as a personal message, can be added in a few seconds. It is important that your notes remain clear, because too many strokes can quickly become confusing.

Step 10: Save changes
Once all corrections are made, you save the document. Make sure that after saving, you pass the file back to the client or layout designer, for example via Dropbox, email, or another sharing method. Without saving, your comments are lost as soon as you leave the view.

Step 11: Correct typos directly in the text
Besides commenting, you can also edit the text directly. This is especially useful when you notice transposed digits or a missing digit, as with the bathroom in the floor plan, whose area is given too small at 5.83 m². Select the editing function, tap the text passage, and correct the value directly. The app automatically recognizes text frames, so you can target the spot precisely.

Step 12: Change font size, font style, and color
Once you have selected a text, you can also format it. You change the font size, make individual words bold, or switch the color, for example to red, so that the correction stands out immediately. These formattings are especially helpful when you want to highlight a spot that should be checked again after the correction.

Step 13: Move text boxes
If a text box is not in the right place, simply drag it to the desired position. This also applies to texts that have already been edited. In the example, the corrected value is moved closer to the appropriate spot in the floor plan. Make sure the box is not placed over other layout elements, otherwise new errors will arise.

Summary – Editing PDFs on the iPad: Acrobat app step by step
The mobile Acrobat app turns your iPad into a full-fledged proofreading tool. You highlight passages, leave notes, strike out superfluous sentences, underline important points in eye-catching colors, and add texts or drawings with the pen. If an error is in the text itself, you correct it in a few steps and adjust the font, color, and position. The video description also points out the "Organize Pages" function, with which you can rearrange or delete pages. This tool is not shown in the video, but is worthwhile for more extensive changes.
FAQ
Can I use the Acrobat app without an Apple Pencil?Yes, highlights, notes, and text corrections also work with your finger; only freehand drawing is significantly more precise with the pen.
Where do I find the comment functions?The tools for highlights, notes, and drawings are located in the bottom toolbar, which you see after opening the document.
Are text frames recognized automatically?Yes, the app recognizes text frames and lets you edit, format, and move texts directly.
How can I rearrange or delete pages in the PDF?With the "Organize Pages" function, individual pages can be reordered or specifically removed.
Do I have to save my changes?Yes, save the document after editing so that all notes, highlights, and text changes are preserved.
