Night photography: technique, motifs & practice

Night photography: lighting a car with speedlights and color gels

All videos of the tutorial Night photography: technique, motifs & practice
Marko Bogdanovic
By Marko Bogdanovic Last updated on

Photographing a car at night seems unspectacular at first glance. The paint surface swallows the light, the ambient lamps provide little substance, and in the end the image looks flat. This is exactly where this tutorial comes in. You will learn how to deliberately light a vehicle with two speedlights and color gels and give the image a cinematic look.

Night photography: technique, subjects & practice: 4.5 Flashes with color foil

The video is only loaded from YouTube when you play it – data (including your IP address) is then transmitted to YouTube/Google. More in the privacy policy

The starting point is a Mercedes in a medium-sized parking lot. The location is well chosen: there are various light sources with different color temperatures, plus interesting building architecture in the background. Step by step, you will see how the image develops from a first, not very meaningful test shot into a coherent composition.

Key Takeaways

For night shots, the camera should work with an aperture of f/16 and a long exposure time so that light sources are rendered as stars. The flash takes care of shaping the car, while the exposure time determines the balance with the background. Color gels create a contrast of orange and blue that makes the subject significantly more interesting. Test shots are indispensable here, because every change in the flash position noticeably changes the result.

Step 1: Determine the Location and Image Idea

Before you set up the camera, it is worth taking a close look at the surroundings. Look for light sources with different color temperatures, a mix of daylight and artificial light lamps, and for structures in the background that give the image depth. A parking lot with little traffic is ideal because you can work there undisturbed.

Night photography: lighting a car with speedlights and color gels

Step 2: Choose the Camera Position According to the Rule of Thirds

For car photos, the rule of thirds is a proven guideline. You can show two thirds front and one third side, or the other way around. In the example, the choice fell on two thirds front and one third side. Position the camera so that the lines of the vehicle run dynamically into the frame, and check the effect on the display before you continue.

Step 3: Take the First Test Shot

Focus the camera, work with the self-timer and an exposure time of about 10 seconds to avoid camera shake. An aperture of f/16 provides the desired star shape of the light sources. The result is disappointing at first: the image looks milky because light falls on the windshield from several directions. Therefore, turn off the video light to identify reflections and assess the actual image.

Night photography: Lighting a car with speedlights and color gels

Step 4: Mount the Flash Manually

The ambient light comes almost exclusively from behind, and the few lamps provide hardly any interesting light. This is where the speedlight helps. Mount it on the camera, set it to manual mode, and choose a low power. In the example, it was 1/8. Then take a test shot. The car is now clearly recognizable as a Mercedes, but the image still needs more design.

Night photography: Lighting a car with speedlights and color gels

Step 5: Adjust the Exposure Time and Tone Down the Background

The exposure time controls how much of the ambient light gets into the image. In the example, it was halved from 10 to 5 seconds. As a result, the background recedes, and the flash gains more weight. The photo looks more focused, yet the passengers in the interior remain visible. Experiment with the exposure time until the ratio of car to surroundings is right.

Night photography: Lighting a car with speedlights and color gels

Step 6: Detach the Flashes from the Camera Hot Shoe and Use Color Gels

To create more atmosphere, you detach the flashes from the camera and distribute them between two assistants. This way, light direction and angle can be chosen freely. In addition, you place color gels in front of the flash heads. In the example, Lee test gels were used, which are available in many colors. One flash gets a blue gel for cool light from the front, the second gets two orange gels to enhance the warm background. The gels are simply attached with adhesive tape or a clip. A practical tip: the gels last surprisingly long but are sensitive to heat and moisture.

Night photography: Lighting a car with speedlights and color gels

Step 7: Determine the Flash Positions

The position of the flashes determines the overall image. One assistant stands to the left of the vehicle and lights the front, the second goes to the back and creates rim light from the side. Make sure that the light is not reflected directly into the camera. Especially with paint and metal, reflections quickly show unattractive patches. Small changes of a few centimeters can make a big difference here.

Night photography: Lighting a car with speedlights and color gels

Step 8: Readjusting the Front Flash

After the next test shot with a five-second exposure, the image already looks colorful, but still not harmonious. The front flash lights up the ground too much, and the background dominates. Therefore, tilt the flash slightly upward and to the side until the light falls specifically on the bodywork and the ground recedes.

Night photography: Lighting a car with speedlights and color gels

Step 9: Shortening the Exposure Time Further

If the background is still too present, shorten the exposure time further. In the example, going from 5 to 1 second led to a significantly darker surrounding. The car now looks more aggressive and is reminiscent of a cinematic look. The effect here comes solely from the exposure time; the flashes remained unchanged at full power.

Night photography: Lighting a car with speedlights and color gels

Step 10: Testing in Advance with Continuous Light

An insider tip from practice: Before you fire the flash, you can try out the light position with a continuous light source and a higher ISO. This way you can see immediately where the light falls and how it reflects on paint and metal. This method saves time and especially helps beginners develop a feel for light direction. Afterwards, you transfer the positions you found to the flash.

Night photography: Lighting a car with speedlights and color gels

Step 11: Conclusion and Further Test Shots

At night, you can take appealing car photos even without flashes. Make sure there is enough light from the front. For colorful, atmospheric images with color contrast, however, side flashes with color gels are an excellent addition. Take your time for several test series, because only by experimenting will you find the balance between flash, exposure, and color. Have fun experimenting!

Night photography: Lighting a car with speedlights and color gels

Summary – Night Photography: Showcasing Cars with Speedlights and Color Gels

You have seen how a car is lit at night with two speedlights and color gels. The camera position follows the rule of thirds, aperture 16 creates light stars, and the exposure time determines the ratio between subject and background. The flashes can be contrasted in orange and blue with color gels and targeted positioning. With continuous light, you can test positions in advance before using the flash. Repeat the test shots until your image has exactly the look you want.

FAQ

Which aperture is suitable for night shots with light stars?An aperture of 16 works well because it renders light sources as star-shaped rays.

Why does the image look milky without a flash?The ambient light comes from multiple directions and reflects strongly on the windshield. Turn off additional light sources to check the reflections.

How do I hold the color gels on the flash?Attach them with tape or clips directly in front of the flash head. Make sure they sit tightly and let the light through evenly.

Why does the image get darker with a shorter exposure time?A shorter exposure time lets less ambient light onto the sensor. As a result, the background recedes, and the flash has a stronger effect on the car.

What flash power makes sense for getting started?Start with a low manual power, for example 1/8, and increase it step by step until the car is clearly visible.

Can I test the light position without a flash?Yes, with a continuous light source and a higher ISO, you can check the light direction in advance. Afterwards, you transfer the positions to the flash.

Why should I plan for assistants?With helpers, you can hold flashes at different positions at the same time. Differences of millimeters and centimeters can thus be implemented much faster.

815,807,222,1252,555,829
Marko Bogdanovic
Trainer About Marko Bogdanovic Marko Bogdanovic is in his mid-thirties and works as a freelance commercial & wedding photographer/filmmaker in the Black Forest. His skills include an enormous amount of technical know-how when it comes to cameras. All courses by Marko Bogdanovic