Photoshop for beginners & intermediates

Learn the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Subjects

All videos of the tutorial Photoshop for beginners & intermediates
Gabor Richter
By Gabor Richter Last updated on Shown in: Adobe Photoshop CC

Imagine you want to separate a person from their background or draw your own graphic shape that looks exactly the way you need it. That's what the Pen tool is for. It seems a bit unwieldy at first, but it is one of the most versatile tools in Photoshop. In this tutorial, you'll learn how to build shapes point by point with the Pen tool, adjust colors and strokes, and finally cleanly cut out a subject.

Photoshop for beginners & intermediates - 4.6 Drawing pencil

The video is only loaded from YouTube when you play it – data (including your IP address) is then transmitted to YouTube/Google. More in the privacy policy

Key Takeaways

  • The Pen tool (also called the Path tool) works with anchor points that you place one after another.
  • In "Shape" mode, vector shapes with fill and stroke are created; in "Path" mode, a pure line for selections is created.
  • The rubber band shows you the line between the points before you click.
  • By dragging on a point, you create round curves instead of hard edges.
  • A closed path can be moved using the Command key (Windows: Ctrl) and fine-tuned using the Alt key.
  • You create a selection from the path via the context menu, after which you can apply a mask.

Step-by-Step Guide

Step 1: Finding the Pen tool in the toolbar

Open the toolbar on the left side of the screen. You can recognize the Pen tool by its icon, which looks like a fountain pen. When you select it, the options bar at the top changes. Clicking the icon or pressing the keyboard shortcut P is enough to activate the tool.

Learning the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 2: Placing the first anchor points

Click once in the document with the Pen tool. At first you only get a small square that marks the starting point. If you place a second point, a straight line is created. If you place a third point, you can already see a triangle made up of three anchor points. Each further click adds a new point to the shape, and the shape grows piece by piece.

Step 3: Closing the path

To get a closed shape, move the mouse pointer back to the starting point. A small circle appears next to the pointer, signaling that the path will be closed when you click. If you click at this spot, Photoshop connects the last line to the beginning and the shape is complete.

Step 4: Designing fill and stroke in "Shape" mode

Take a look at the options bar at the top. By default, the "Shape" mode is set there. In this mode, you create a vector shape with fill color and stroke. You select the fill color via the color swatch in the options bar. You get the stroke via the corresponding field, where you set the color and stroke width. The width is 1 pixel by default. You can increase it as much as you like to make the effect visible. The color can be changed afterwards at any time. You can also adjust the stroke type, for example whether it should consist of solid lines or dots. For demonstration purposes, strong colors are ideal, but for your own projects you should pay attention to a harmonious design.

Learning the Photoshop Pen Tool: Paths, Shapes, and Clipping

Step 5: Recognizing the shape layer

As soon as you have drawn a shape in "Shape" mode, a new icon appears next to the layer in the Layers panel. It shows you that it is a shape layer. This way you can see at a glance that you are dealing with a vector shape and not a pixel image.

Step 6: Switching from "Shape" mode to "Path" mode

If you want to cut out subjects, you don't need a filled shape, just the line itself. To do this, select the "Path" mode in the options bar. The colors disappear, and you only see the path with its anchor points. You can later convert this path into a selection. It is important that you do not switch to another tool while drawing, because otherwise the process will remain interrupted.

Learning the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 7: Working precisely with small points

When cutting out, accuracy determines the result. Therefore, zoom in closer to the outline so that you can trace it cleanly. For beginners, it is recommended to place many small segments with short distances between the points. This makes the path smoother, and you keep control over its course. Long straight sections, on the other hand, quickly look angular and unnatural.

Learning the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 8: Showing the Rubber Band

Many beginners click into the unknown because they don't know what the next line will look like. That's what the Rubber Band option is for. You can find it under the gear icon in the options bar when the Pen tool is active. With the Rubber Band enabled, you see the line before you click, before you finally set the point. This makes the work much clearer.

Learn the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 9: Creating Round Curves by Dragging

Straight lines aren't suitable for every subject. To create curves, click on a point and hold down the mouse button. Then drag the mouse in the desired direction. This creates handles that let you control the curvature of the line. With the Rubber Band, you can also see how round the curve will be. This makes it very easy, for example, to trace the outline of a head or a shoulder.

Learning the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 10: Correcting Mistakes and Adjusting Paths Afterwards

If you make a mistake, such as a point outside the desired line, you don't have to start over completely. With the keyboard shortcut Command plus Z (Windows: Ctrl plus Z) you undo the last step. Alternatively, you can also edit the path afterwards. To do so, hold down the Command key (Windows: Ctrl), and you can move the entire path to a different location. To adjust individual handles, hold the Alt key (Mac: Option key) and click on the corresponding handle. This lets you fine-tune the curves.

Learn the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 11: Closing the Path and Creating the Selection

Once you have gone all the way around the subject, you return to the starting point and close the path. After that, you can convert the path into a selection. One way is to hold down the Command key (Windows: Ctrl) and click on the path in the Paths panel. Another way is via the context menu: right-click in the document and choose "Make Selection". There you can also set the feather radius so that the transition looks more natural later.

Learning the Photoshop Pen Tool: Paths, Shapes, and Cutting Out Images

Step 12: Isolating the Subject with a Mask and a New Background

Confirm the selection with OK, and you have your shape as a selection. You can then create a layer mask from it so that the background is hidden. Next, place a new layer with a background color beneath the subject, for example white. The cut-out figure then stands in front of the new background. This method is especially handy for image composites.

Learn the Photoshop Pen Tool: Paths, Shapes, and Masking

Summary – Mastering the Photoshop Pen Tool: Creating Shapes and Isolating Subjects

The Pen tool is a versatile aid with which you can create both your own shapes and precise selections. In "Shape" mode, vector graphics with fill and stroke are created; in "Path" mode, you prepare for isolating a subject. With the Rubber Band, the curves, and the keyboard shortcuts for moving and correcting, you stay in control at all times. The most important advice is: practice regularly. The more often you work with the tool, the more confident you become and the more possibilities you discover.

FAQ

How do I create a closed shape with the Pen tool?Move the mouse pointer back to the starting point and click there. As soon as a small circle appears, the path closes.

What is the difference between the "Shape" and "Path" modes?In "Shape" mode, a vector shape with fill and stroke is created in a shape layer. In "Path" mode, you only get the line, which you can then use for a selection.

What is the Rubber Band for?The Rubber Band shows you the line between the last point and the current mouse pointer. This way you see what the line will look like before you click.

How do I create round curves instead of straight lines?Click on a point, hold down the mouse button, and drag in the desired direction. This creates handles with which you control the curvature.

How do I correct a mistake while drawing?With Command plus Z (Windows: Ctrl plus Z) you undo the last step. You can also move the path afterwards while holding the Command key (Windows: Ctrl) and adjust individual handles with the Alt key.

How do I convert a path into a selection?Hold down the Command key (Windows: Ctrl) and click on the path in the Paths panel. Alternatively, right-click and choose the "Make Selection" option in the context menu.

Why should I set small points when isolating a subject?Small distances between the points result in a smoother curve. Long straight segments quickly look angular and make the subject appear unnatural.

1113,842,715,663,849,600
Gabor Richter
Trainer About Gabor Richter Gabor Richter is an image retoucher and digital artist. He specializes in digital image editing for agencies and photographers in the fields of people, fashion, weddings and advertising. All courses by Gabor Richter